Ice Cream Carts for Sale

COLD PLATE CARTS (hold temperature for 8-12 hours without electricity or dry ice)

Watch video below (press the play button) on our best selling cold plate cart - the BDC-8

CLICK TO LEARN MORE

**Meeting health department requirements is the customers responsibility. Talk to us for clarity on this before making your purchase.

All cold plate pushcarts are manufactured with stainless steel bottoms and have built-in cold plates for maximum efficiency and quick freezing for an overnight charge.  

Cold plate pushcarts have an average of 3" of poured insulation and oversized compressors and are capable of operating at the specified temperature in 90 degree weather. 

The tops on these cold plate ice cream carts are made of stainless steel with welded corners.  

All electrically operated carts will be ETL or UL listed for outdoor use.

All pushcarts will be NSF listed for the appropriate use. 

All ice cream pushcarts have oversized electrical power cords suitable for outdoor use.

Lid locks and umbrella brackets are provided on all ice cream carts as standard equipment.

All ice cream carts have heavy-duty welded aluminum base frames for maximum strength and minimum weight.

Our carts are standard for ice cream novelty temperatures.  Alternate uses, such as carts for Italian ice, water ice, other products can be specified at time of order for other temperatures.

watch video below (press the play button) on our best selling cold plate cart - the BDC-8

BDC-8 Pictured Above - BDC-8 with Optional Canopy Pictured Below

SPECS FOR COLD PLATE CARTS BELOW - SEE DRAWINGS AND DIMENSIONS AND PRICING FURTHER DOWN THE PAGE -      no assembly is required

BDC-4 drawing below

BDC-6 drawing below (small lid opening - mainly for novelties)

BDC-8 (best seller) drawing below

BDC-10 (the monster) drawing below

Pricing - LOWEST PRICES ANYWHERE Guaranteed (call or email us for shipping):

Gravity Feed Dip Well System Pictured below - Only $768 (includes premium 16" dipwell) - easy to attach and remove depending on needs

Gravity Feed Dip Well Picture above on CLT-6 cart - Picture is from Server Side. Customer sees stainless steel on other side.

Self Contained Mobile  Hand Washing Sink Below -

SPECS FOR NSF APPROVED MOBILE CART SINK

Constructed of 18 and 22 gauge type 304 stainless steel.
Requires 120/1/60 electrical outlet 15 amp circuit.
Sink bowl 21 gauge S.S. 11.5" Diameter x 5 1/4" deep.
Chrome 4" lavatory faucet with crystal handles.
Sink drain (1.5" Dia.) with strainer & stopper.
Ariston water heater Model GL2.5, 2.5 gal. capacity 110/1/60 12.5 fl a., 1500 watt/12 amps. (UL, CSA compliant).
Shurflo series 8000 diaphragm pump, 115/1/60, .61 fla,
1.7 gpm free flow, w/pressure shutoff, .5 amp (NSF, UL).
Optional Flojet pump 12/1/60, .5 fl a, .8 gpm., .6 amps (NSF).
Supply tank with fill port & overflow-6 gal. nominal capacity.
Waste tank with overflow & drain-9 gal. nominal capacity.
Casters - 4" swivel with brake.
Optional quick coupling fill valve.

Cash Drawer for Cart

PUSH CART

Our BDC-8 Cold Plate Push Cart was featured on the hit TV show,

The Apprentice

on September 23, 2010

Check out the episode on the screen below.

Apprentice teams were challenged with selling ice cream novelties in the heart of New York City.

Pretty funny stuff, and watching the episode will give you a really good idea of what the cart looks like "in action".

CLICK THE SCREEN BELOW AND PLEASE BE PATIENT

IT WILL TAKE A FEW MINUES TO LOAD -

 EVEN IF YOU GET AN ERROR MESSAGE ABOUT SPONSORS,

WAIT A FEW MINUTES (seconds will tick down on top of screen)

AND THE SHOW WILL START SHORTLY AFTER THE COMMERCIALS