The Best Value with the Features You Need. Take Your
Products to the People with these ice cream pushcarts designed to HEAT
UP Your Sales.
While these carts are used primarily for selling ice
cream novelties, many people will use these carts to scoop ice cream,
serve frozen lemonade, water ice, gelato, or Italian ice.
MODEL CLT-6
Pictured on the Left - Needs to remain plugged in to
hold Temperature.
Built to Last - Stainless Steel Bottoms Prevent Corrosion
NSF & UL/ETL Listed
Exclusive Digital Thermostats Make Hitting Your Optimal
Temp a Breeze
Poured Urethane makes them Lighter and More Durable
Thick Insulation Helps Keep Proper Temperature on Hot Days
Best Wheels in the Business - 8" Natural Rubber Wheels
Easily Handle Toughest Terrain
Umbrellas or Canopy's Available
Digital Thermostat on the CLT-6
makes it easy to hit your target temperature. Simply set the target temp
just the way you would an air conditioner thermostat and watch it work
its way toward it.
MODEL CLT-6 PICTURED
Whether these
carts are built and configured as ice cream carts or Italian ice carts,
or water ice carts, you can be sure you are getting a quality piece of
equipment made in the USA. These carts are build from the ground up and
the refrigeration is built specifically to take the beating that a cart
will eventually take. We do not start with a cheap store freezer and try
to modify for outdoor use.
The cart above is a CLT-6 with a lighted canopy. For
only $468 more, a gravity feed dip-well can be added to this cart. See
pictures of the gravity feed dip well toward the bottom of this page.
SEE SPECS BELOW AND DRAWINGS WITH
DIMENSIONS BELOW THE SPECS - no assembly is required
Model CLT4
Capacity 5 cu.ft.
Approx 500 Novelties
1/3 h.p. compressor
R404a refrigerant
115 volts, 8 amps
Model CLT6
Capacity 8 cu.ft.
Approx 800 novelties
1/3 hp 404a refrigerant
115 volts, 8 amps
Model CLT8-DI
Capacity 12.5 cu.ft.
Approx 1250 Novelties
1/3 h.p. Compressor
R-404a refrigerant
115 v., 8 amps
Specs for the BDC Models:
Lid locks standard on all models.
Top to be 18 ga. type 304 stainless steel, standard. Optional solid
surface materials.
Base frame to be welded aluminum.
All exposed corners welded and polished smooth.
Finished exterior stanrd in white ppre-paint steel. Optional Lexan
panels at additional charge.
Wheels to be 6" or 8" diameter (2) swivel w/locks, (2) rigid. Load
rating of wheel to be a minimum of 350 lbs. each.
Interior of cart to be 24 ga. stainless steel, standard.
Bottom drain installed for defrost.
Condensing unit mounted on glide out base with service valves.
Carts to have 5 year limited warranty against insulation failure or
internal tubing leaks.
Carts to be ETL listed for outdoor use.
[1].JPG)
